New Items

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Approx. Rs 11,500 / PieceGet Latest Price

• high pressure piston type regulator & regulators for corrosive gases like ammonia, clorine, etc. Are also available
• regulator consist of inlet & outlet pressure gauges. Inlet pressure gauge shows the total pressure of cylinder and outlet pressure gauge shows regulated pressure.
• outlet pressure range : 0-40,0-70,0-100kg /cm2 in piston type.

Approx. Rs 27,800 / PieceGet Latest Price

Approx. Rs 3,800 / PieceGet Latest Price

Approx. Rs 2.1 Lakh / PieceGet Latest Price

Higher capacity model also available like 2 LPM & 3 LPM

• Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology.
• The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane.
• Once separated, the hydrogen gas goes through a series of purification and moisture removal systems to achieve the desired level of purity while the oxygen gas is being discharged into the atmosphere.
• Electrolytic membrane technology has its advantages over alternative hydrogen generating techniques as it is clean, requires less maintenance and there is no need to store chemicals to maintain operation.
• Only pure double distilled water (initially some KOH), is required to provide trouble free long term operation.
• Membrane separation is also less time consuming as only water is needed for routine maintenance.

Approx. Rs 5.5 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 28,000 / PieceGet Latest Price

Approx. Rs 4 Lakh / PieceGet Latest Price

Approx. Rs 1.23 Lakh / PieceGet Latest Price

Approx. Rs 2.2 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 1.55 Lakh / PieceGet Latest Price

We Specialize in both manual and automatic hydraulic presses
Also more IR / FTIR Accessories are available.


Manual Press
- A complete Laboratory hydraulic press producing a force about 15 tones use to make high quality 13 mm Pallet used for IR/FTIR/XRF Solid Sampling
- 15 ton laboratory Hydraulic Pellet Press is a compact, elegant and robust machine, typically used by R&D & QC labs for various pelletizing application for IR/XRF etc.
- The high pressure pumping unit supplies hydraulic fluid to the up-stroking ram of the cylinder. This causes the ram to rise steadily and positively in the
upward direction. As a result, pressure is applied on any object placed between screw and piston top plate.

Approx. Rs 1.35 Lakh / PieceGet Latest Price

Features

       purity Zero Air at selected pressure.

• For TOC Analyzer, compressor takes the air from

       atmosphere, the hot air is then passed through             copper

        cooling coil.

• The cool air is then passed through furnace where

        hydrocarbons are cracked at high temperature            (temp.

         range - 300°C to 400°C) in presence of catalyst. The

        furnace reaction at higher temperature breaks the

hydrocarbon into CO2 & H O

• Water is drained away through 5μ & 0.01μ filter

• operates with alternating pressure increase and
• decrease
• Untreated air flows under pressure through the
• reaction towers containing molecular sieve adsorber

Salient Features:

• Micro controller digital display

• Deliver constant pressure & flow

• Fully Automatic Programmable System

• Easy Maintenance and space saving

• Effortless and easy operation

• Improves instrument performance

• Fully regenerative, durability with PSA technology

Applications:

• GC-FID, FPD, NPD, AED

• GC-MS, LC-MS-MS, ICP / NMR

• FTIR / IR, ELSD detector

• Purging, Ampule Filling

• Thermal instruments, Turbo Evaporator (N2

Concentrator)

• Analytical Instruments

Technical Specification for Zero Air Generator:

PRINCIPLE

SPECIFICATIONS

Moisture                             < 5 ppm
Total Hydro Carbon           < 0.1 ppm 
CO & CO                               < 2 ppm 
Purity                                  UHP grade   
Micro Particulates               < 0.01μ 
Capacity of ZAG                  upto 4 LPM at 5kg/cm² 
Method of purification         Pressure Swing                                                                 Adsorption 
Room temperature               10 °C - 25 °C   
Start up time                        5 minutes

Approx. Rs 2 Lakh / PieceGet Latest Price

Approx. Rs 1,450 / PieceGet Latest Price

• 13mm Nylon Syringe Filter 0.45μ (pk. of 100 nos.)
• 13mm Nylon Syringe Filter 0.22μ (pk. of 100 nos.)
• 13mm PVDF Syringe Filter 0.45μ (pk. of 100 nos.)
• 13mm PVDF Syringe Filter 0.22μ (pk. of 100 nos.)
• 13mm PTFE Syringe Filter 0.45μ (pk. of 100 nos.)
• 13mm PTFE Syringe Filter 0.22μ (pk. of 100 nos.)
• 25mm Nylon Syringe Filter 0.45μ (pk. of 100 nos.)
• 25mm Nylon Syringe Filter 0.22μ (pk. of 100 nos.)
• 25mm PVDF Syringe Filter 0.45μ (pk. of 100 nos.)
• 25mm PVDF Syringe Filter 0.22μ (pk. of 100 nos.)
• 25mm PTFE Syringe Filter 0.45μ (pk. of 100 nos.)
• 25mm PTFE Syringe Filter 0.22μ (pk. of 100 nos.)

pack 100

Approx. Rs 5,600 / PieceGet Latest Price

Approx. Rs 1,600 / PackGet Latest Price

Approx. Rs 98,000 / per pieceGet Latest Price

The recirculating chillers are designed to handle high cooling capacities. These chillers operate in the temperature range from -10 DegreeC to atmosphere and have built in high pressure pump.  

• Control Panel consists of temperature ready status of Chiller ON/OFF Switch, with Red Coloured Indicator Green coloured indicator which indicates Initial Power ON
• This has an Inbuilt delay of about 1-2 minutes for the Compressor to be ON.
• Switch for Chilled Water circulation pump. This has no time delay.
• This is fitted in a Floor Mounting type with Castor Wheels (optional).

Additional Information:

Approx. Rs 2,400 / PieceGet Latest Price

Additional Information:

Approx. Rs 5.9 Lakh / PieceGet Latest Price

Approx. Rs 27,500 / PieceGet Latest Price

Model Selection :

• HCO-01 : Separate Oven Temp. Controller
• HCO-02 : Inbuilt temperature controller oven
• HCO-03 : Inbuilt heating of Rheodyne Injector
• HCO-04 : Force air circulation heating type oven

Consist of :
• Micro Controller based / PID Temperature Controller
• Oven Module

Technical Specification :
• Applicable input : PT-100, 2- Wire
• Temperature Range : Ambient ± 5º C to 100º C
for Models HCO-01 to
HCO-04
• Displays : 4-digit seven-segment LED
display for Process value
(PV) Set Value (SV)
• Stabilisation Time : 15 min
• Control action : Complete PID Controller

Additional Information:

Approx. Rs 30,000 / PieceGet Latest Price

• Pconlab Waste Manifolds contain and adsorb hazardous solvent vapours and connect the LC system safely to the organic solvent waste container, creating a completely closed solution.
• The Activated carbon filter adsorbs hazardous solvent vapors. A breakthrough indicator shows when carbon filter is fully loaded and need to be replaced.
• Each Manifold offers multiple connection ports for any waste line to be securely connected

Approx. Rs 30,000 / PieceGet Latest Price

• Pconlab Waste Manifolds contain and adsorb hazardous solvent vapours and connect the LC system safely to the organic solvent waste container, creating a completely closed solution.
• The Activated carbon filter adsorbs hazardous solvent vapors. A breakthrough indicator shows when carbon filter is fully loaded and need to be replaced.
• Each Manifold offers multiple connection ports for any waste line to be securely connected

Additional Information:

Approx. Rs 28,000 / PieceGet Latest Price

Holmium oxide, certified, glass filter

• (for checking the wave length accuracy)
• starna part no. : rm-hg
• wave length (nm): 279, 361, 454, 536, 638
• mounted in a "stress free" proprietary nist design
• supplied in a wooden box

didynium, certified, glass filter

• (for checking the wave length accuracy & photometric accuracy)
• starna part no. : rm-dg
• wave length (nm): 329, 472, 525, 681, 875
• mounted in a "stress free" proprietary nist design
• supplied in a wooden box

inorganic cut-off filters - uv stray light

• starna part no. : rm-kc
• cut off: 200 nm
• potassium chloride concentration : 1. 2% aqueous

Additional Information:

Approx. Rs 3.25 Lakh / PieceGet Latest Price

Approx. Rs 5,000 / PieceGet Latest Price