Analytical Instruments

Approx. Rs 2.1 Lakh / PieceGet Latest Price

Higher capacity model also available like 2 LPM & 3 LPM

• Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology.
• The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane.
• Once separated, the hydrogen gas goes through a series of purification and moisture removal systems to achieve the desired level of purity while the oxygen gas is being discharged into the atmosphere.
• Electrolytic membrane technology has its advantages over alternative hydrogen generating techniques as it is clean, requires less maintenance and there is no need to store chemicals to maintain operation.
• Only pure double distilled water (initially some KOH), is required to provide trouble free long term operation.
• Membrane separation is also less time consuming as only water is needed for routine maintenance.

Approx. Rs 5,600 / PieceGet Latest Price

Approx. Rs 11,500 / PieceGet Latest Price

• high pressure piston type regulator & regulators for corrosive gases like ammonia, clorine, etc. Are also available
• regulator consist of inlet & outlet pressure gauges. Inlet pressure gauge shows the total pressure of cylinder and outlet pressure gauge shows regulated pressure.
• outlet pressure range : 0-40,0-70,0-100kg /cm2 in piston type.

Approx. Rs 2,200 / PackGet Latest Price

Approx. Rs 5,600 / PieceGet Latest Price

Model

Max Flow (Ltrs/min)

Max. VACCUM

(inches / mm Hg)

Max Pressure

(PSIg)

Approx Weight

(kg)

MOTOR HP

Approx Dimensions (mm)

PCI-15

15

22” (554MM)

25

3.0

1/20

175 X 110 X 150

PCI-25-S

15

27”(680MM)

35

5.5

1/16

220 X 110 X 150

PCI-25-P

25

22” (554MM)

25

5.5

1/16

220 X 110 X 150

PCI-25-AX

15

27”(680MM)

--

--

1/16

---

PCI-45

45

22” (554MM)

35

7.0

1/8

200 X 125 X 200

PCI-45-CRP

30

22” (554MM)

10

7.0

1/8

220 X 150 X 220

PCI-75-S

45

27”(680MM)

55

12.5

1/4

300 X 130 X 200

PCI-75-P

75

22” (554MM)

40

12.5

1/4

300 X 130 X 200

PCI-75-CRP

38

22” (554MM)

10

--

1/4

---

ROCKER-300

17

24”(600MM)

12

--

1/4

---

PV-300

17

90 mbar

12

4.1

1/4

---

Salient Features:-

• No Lubrication required
• Absolutely Portable
• Totally Oil-free construction
• Practically maintenance-free
• Diaphragms are made of special 2-Ply Nylon reinforced neophrene rubber.

Approx. Rs 2.3 Lakh / PieceGet Latest Price

21 CFR Complliant Software available for Server Version / Desktop Version.

PCI is pleased to introduce the FlowCal 5000

Models Available-

• Name - LFM-01
• Calibration Point - Single
• Calibration at - 1.0 ml / min

• Name - LFM-02
• Calibration Point - Three
• Calibration at - 0.5, 1.0, 2.0 ml / min

• Name - LFM-03
• Calibration Point - Four
• Calibration at - 0.5, 1.0, 1.5, 2.0 ml / min

FlowCal 5000 Specifications -
• Reading Update Time
- 15 sec @ 2 ml/min
- 25 sec @ 1 ml/min
- 45 sec @ 0.5 ml/min
• Measuring Volume - 140 μl
• Priming Volume - 250 μl
• LCD Display - (12.7mm)- 4 digits and 3 status symbols
• RS232 output - (6 digits) XX.XXXX ml/min
• Size - 138mm x 76mm x 45mm
• Weight - 320g, 12 oz

Three modes of operation are available:

• Printer Mode: liquid flow readings are displayed on the LCD and output to a printer if one is connected. A running average option is available in this mode
• Terminal Mode: in this mode the liquid flowmeter is controlled by the terminal or PC. Extra commands for averaging any number of readings are included.
• Test Mode: this mode allows the user to test the display, valve and RS232 interface and also display the calibration date.

All instruments are supplied with the following:

• Mains ‘wall block’ power supply with a choice of 240v 3 pin UK, 230v 2 pin European or 100v 2 pin USA/Japan.
• RS232 input/output cable: 8way mini-din plug to PC COM port 9 pin female.
• UKAS traceable single point flow calibration certificate is supplied as standard (UKAS is the UK equivalent of NIST)
• Universal mounting kit: allows free standing mount, wall mounting, ‘stack system’ mounting and bottle top mount.
• Black plastic carrying case with foam inserts. All parts of the mounting kit are packed within the carrying case.
• Cleaning kit now supplied with the flow meter.

Approx. Rs 1.9 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 1.2 Lakh / PieceGet Latest Price

Principle of Ultrasonic Cleaner

High frequency electrical energy is converted into ultrasound waves by

means of ultrasonic Tranducers, which are bonded on the base of S. S.

Water Tank. These high frequency sound waves create in the liquid

countless, Microscopic Vacuum Bubbles, which repidly expand and collapse.

This phenomenon is CAVITAION. These bubbles act like miniature high

speed brushes, driving the liquid in to all openings and minutes

recesses of the Object immersed in the liquid. Intense scrubbing of

Cavitation cleans away all the dirt and soil from the object immersed

and the object is perfectly cleaned. Intricate objects can be cleaned

with either complete or little Dismantling.

Specification of Water Chiller

It Consist of Chiller unit connected to S.S Water Storage Tank of about

15 liters Capacity to reduce the water temperature to about 15 ºC It

has an inbuilt pump & Re-Circular unit to Circulate Chilled water

through the S.S Cooling coils and bring back to chiller unit.

Technical Specification of Ultrasonic Bath

• Electric Supply : 230V AC, 50hZ 1PHASE

• Tank Material : S.S. 304 Grade Inner & Outer.

• Construction : Ultrasonic Generator & SS Tranducerised.

Tank are housed in one S.S 304 grade cabinet.

• Transducer : PZT Sandwich type bonded on the base of S.S.

Tank. With Transduser Protection for

chilled water Condensation.

• Cooling Coils : SS Coil of 1/2" dia are fitted in the SS tank

to cool the liquid inside the tank, through

which chilled water has to be circulated

water in & out connection are provided for

the coils

• Special tray to collect & drain water of condensation

(chilled water)

• Capacity available: 10 lit, 20 lit, 30 lit & higher as per

requirement

• Two digit 0-30 mts. timer for Ultrasonic with lid & basket

Salient Features

• E asy to operate & made of S. S. Tank.

• n ge nously

I di manufactured with advanced MOSFET

technology, with Auto-tuning facility.

• Digital Tuning of Transducers with Generators to avoid any

frequency shifted even during demanding applications.

• Compact, rugged and highly durable systems.

• Extensively protected electronic circuits means longer and safer

operations.

Additional Information:

Approx. Rs 16,200 / PieceGet Latest Price

• DFM-01 : 1 ml/min. to 50 ml/min. with least count of 0.1 ml/min
• DFM-02 : 5 ml/min. to 500 ml/min. with least count of 1 ml/min
• DFM-03 : 200 ml/min. to 2000 ml/min. with least count of 1 ml/min
• DFM-04 : 1 ml/min. to 500 ml/min. with least count of 0.1 ml/min (auto range)
• DFM-05 : 1 ml/min. to 1000 ml/min. with least count of 0.1 ml/min (auto range)
• DFM-06 : 10 ml/min. to 400 ml/min. with least count of 1 ml/min (auto range)
• Accuracy : ±2% of Reading, ±1 Digit
• Power Supply : 230 V AC, 50 Hz, 10W
• Resolution : 0.1 ml/min. 1 ml/min

Dimension:

• DFM- 01 : 27 cm (H) x 13 cm (W) x 10 cm (D)
• DFM- 02 : 27 cm (H) x 13 cm (W) x 10 cm (D)
• DFM- 03 : 27 cm (H) x 13 cm (W) x 10 cm (D)
• DFM- 04 : 25 cm (H) x 16 cm (W) x 4 cm (D)
• DFM- 05 : 17 cm (H) x 7 cm (W) x 3.5 cm (D)
• DFM- 06 : 20 cm (H) x 10 cm (W) x 4 cm (D)
• Optional Attachment : Battery Operated Rechargeable System

• Direct Digital Readout
• Microcontroller Based
• Digital Display of LED/LCD
• Highly Accurate and fast readout
• Useful for measuring any gas flow rate specially for G.C. Analytical Instruments.
• Easy to Operate
• Free of Operational Human errors
• DFM-01, 02, 03 04 - Table Mounting (Soap Solution based)
• DFM-05, DFM-06 - Portable (direct measurement)

Approx. Rs 74,000 / PieceGet Latest Price

• Temperature upto 60°C with Heate also avalible.
• Higher Capacity also avaiable.
• Outer Chamber also available in SS on request.

The recirculating chillers are designed to handle high cooling capacities. These chillers operate in the temperature range from +5ºC to atmosphere and have built in high pressure pump. These chillers are useful to cool other instruments which generate heat. Viz. Lasers, Furnaces, XRD, etc., Graphite Furnace, Fermenters, Thermal Instruments, Rotary Evaporator.

Water Chiller Unit: It consists of chilled water storage tank of about8-15 liters capacity along with Compressor, Condensing Coils,Cooling Fan, Temperature Controller Programable type, Water Inlet & Outlet connection and chilled water circulation pump to circulate chilled water through S.S. cooling coils and bring back to chiller tank.
• Control Panel consists of temperature & ready status of Chiller ON/OFF Switch, with Red Coloured Indicator Green coloured indicator which indicates Initial Power ON
• This has an Inbuilt delay of about 1-2 minutes for the Compressor to be ON.
• Switch for Chilled Water circulation pump. This has no time delay.
• This is fitted in a Floor Mounting type with Castor Wheels (optional).

Specifications of Water Chiller Model PCI-WC-01 for AAS & ICP:

• Inner Chamber: SS Duly Polished
• Outer Chamber: M.S. Powder Coated / SS
• Insulation: Duly insulate by P.U.F.
• Refrigerated system & Cooling arrangement: Hermetically sealed compressor
• Flow capacity: 20 ltrs. / min at height of 1 meter
• Outlet connection: 3/8” OD
• Temperature range: 5° to atmosphere
• Temperature control: Temperature controlled by digital temperature indicator cum controller
• Circulator: 0.25HP/ 0.5HP
• Condensor Fan Motor: ‘EPMNADI’ Brand
• Control pannel: Micro controller
• Power: 220/230 Volts, Single Phase, AC mains
• Outer dimension: 14” W x 24” D x 24” H (360W x 600D x 600H mm)
• Higher capacity also available
• Outer chamber also available in SS on request.

Product Price :Get Latest Price