Gas Generator,Nitrogen Generator,Nitrogen Gas Generator,Zero Air Gas Generator,Hydrogen Gas Generator,Turbo Evaporator

Gas Generator

We have emerged as reputed name by offering wide range of Gas Generator such as Nitrogen Generator, Nitrogen Gas Generator, Zero Air Gas Generator and Hydrogen Gas Generator. Designed in accordance with different industrial standards, our range stands high on the features of performance and efficiency. These are widely appreciated for excellent performance, long service life and minimum maintenance.

Nitrogen Generator

We offer Nitrogen Generator, which is available in different specifications to meet the requirements of various industry applications. Our range is developed using quality tested raw material to ensure minimum maintenance. We also offer customization on our range as per the specifications of clients.

Salient features:

Deliver constant pressure & flow
Fully automatic programmable system

Applications area:

GC-FID, FPD, NPD, TCD,AED
GC-MS, LC-MS-MS, ICP/NMR
FTIR/IR, ELSD detector

Send Your Enquiry

Nitrogen Gas Generator

We provide Nitrogen Gas Generator that is used to supply 200 c/minute to 1,000,000 liters/hour in order to obtain desired purity and pressure. These nitrogen gas generators are manufactured in accordance with the demands of different industry applications. By using pressure swing adsorption (PSA) technology, the nitrogen generator produces constant-quality flows of high-purity nitrogen.

The nitrogen gas generators require less maintenance and servicing as it has no moving parts. In this generator, an existing compressed-air supply is used whereas in other cases an integrated compressor or external silenced compressor is installed.

Salient features:

Cost effective
MicroGeN2 nitrogen generator (The smallest generator of high purity nitrogen for low-volume usage)
Compact, lightweight construction using minimum floor space
Optional integrated compressor
Low power consumption and maintenance-free operation
Suitable for TOC, GC, FID, GC-MS, DSC purging and many more applications
Flow rates up to 200cc/minute at 99.9995% purity

Specification:

Principle Specifications	LC-MS	LC-MS-MS (for sciex model)	Turbo Evaporator
Moisture	5 ppm	5 ppm
Total Hydro Carbon	< 1 ppm	< 1 ppm
Co & Co2	< 2 ppm	< 2 ppm
Purity	99.9%	99.99%
Micro Particulates	< 1.10µ	< 1.10µ	< 1.10µ
Capacity of N2	6 to 30 LPM at 100 psig	12 LPM at 100 psig (filtered zero air)	50 to 700 LPM
Generator	(as per selection of model)	8 LPM at 60 psig (purified dry air) 4 LPM at 60 psig (pure nitrogen)	At 60 psig (as per selection of model)
Method of purification	Pressure Swing Adsortion (PSA)	Pressure Swing Adsortion (PSA)	Pressure Swing Adsortion (PSA)
Room temperature	5°C to 25°C	5°C to 25°C	5°C to 25°C
Start Up time	1 hrs/ programmable timer	1 hrs/ programmable timer	1 hrs
Electrical requirements without compressors	230 V AC , 50 Hz, 1ph, 2 Amps	230 V AC , 50 Hz, 1ph, 2 Amps	230 V AC , 50 Hz, 1ph, 2 Amps
Dimensions of N2 Generators in mtr. (without compressor)	1.5 H x 0.8W x 0.8 D (approx) (as per selection of model)	2 H x 1W x 1 D (approx) (as per selection of model)	2 H x 1W x 1 D (as per selection of model)

Send Your Enquiry

Zero Air Gas Generator

Our Zero Air Gas Generators are designed in conformation with international quality standard. These are available in varied specifications to meet the requirements of atomic energy department, government organization and public testing laboratory. We also offer customization on our range as per the specifications of clients.

Salient features:

Study construction
Optimum performance
Energy efficient
Minimum maintenance

Specification:

Principle Specifications	N2 Specifications of All Models	Air Specifications of NAG-01/NAG-01A
Moisture	<2ppm	<2ppm
Oxygen	<5ppm	-
Total Hydro Carbon (THC)	<0.3ppm	<0.3ppm
CO & CO2	<2ppm	<2ppm
Purity	UHP/GC grade	UHP/GC grade
Micron particulates	<0.01u	<0.01u
Capacity of NAG- 01	500ml/min at 5kg/cm2	4000ml/min at 5kg/cm2
Capacity of NAG-01A	200ml/min at 5kg/cm2	1500ml/min at 5kg/cm2
Method of Purification	Pressure Swing Adsorption (PSA) & Depressurisation	Pressure Swing Adsorption (PSA) & Depressurisation
Room Temperature	50C -250C	50C -250C
Start up time	2 hr / programmable by timer	10 min
Electrical requirement	230 VAC, 50Hz, 1ph	230 VAC, 50Hz, 1ph, 5 Amp
For NAG-01 & NAG-01A	5 Amp	-
Size of Generator without compressor (in mm) (approx)	736H x 413W x590D for NAG-01	-
Size of Generator without compressor (in mm) (approx)	730H x 337W x 580D for NAG-01A	-
Net weight of generator (in kg.) (without compressor) (approx)	50 kg of NAG-01	-

Send Your Enquiry

Hydrogen Gas Generator

We supply Hydrogen Gas Generator that produces hydrogen by using most advanced electrolytic membrane technology. The usage of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane. To achieve the desired level of purity, the hydrogen gas goes through series of purification and moisture removal systems while the oxygen gas is being discharged into the atmosphere.

The electrolytic membrane technology has its own benefits over alternative hydrogen gas generator techniques as it is clean and requires minimum maintenance. The generator do not store chemical in order to maintain the operation. Only pure double distilled water (initially) is used.

Salient features:

Precision functioning
Minimum maintenance
Durable
Energy efficient

Specification:

	SGH-300	SGH-500	SGH-1000
Max Hydrogen Flowrate	300 ml/min.	500 ml/min.	1000 ml/min.
Delivery Pressure	0-60 psig (0-0.4 Mpa)
% purity	>99.999%
Power Consumption	150W 180W 220W
Power	198-242V (AC): 50Hz, 1 Phase
Min/max Temperature	5-400C
Max. Ambient Humidity	<85%RH
Suitable Environment	Non-corrosive and dust-free
Dimensions	420 x 210 x 350mm (LxWxH)
Weights	12 kg (approx)
Fluid Tank Capacity	1.5L
Fluid Consumption	Weekly or when level falls below 0.6

Send Your Enquiry

Turbo Evaporator

We offer Turbo Evaporator, which is available in LC-MS and LC-MS-MS models. Based on advanced technology, our range is widely used in research institute, public testing lab, method development lab, pesticides and fine chemical industries. These evaporators are widely acclaimed for consistent performance and durability.

Specification:

Principle Specifications	LC-MS	LC-MS-MS (for sciex model)	Turbo Evaporator
Moisture	5 ppm	5 ppm
Total Hydro Carbon	< 1 ppm	< 1 ppm
Co & Co2	< 2 ppm	< 2 ppm
Purity	99.9%	99.99%
Micro Particulates	< 1.10µ	< 1.10µ	< 1.10µ
Capacity of N2	6 to 30 LPM at 100 psig	12 LPM at 100 psig (filtered zero air)	50 to 700 LPM
Generator	(as per selectio of model)	8 LPM at 60 psig (purified dry air) 4 LPM at 60 psig (pure nitrogen)	At 60 psig (as per selectio of model)
Method of purification	Pressure Swing Adsortion (PSA)	Pressure Swing Adsortion (PSA)	Pressure Swing Adsortion (PSA)
Room temperature	5°C to 25°C	5°C to 25°C	5°C to 25°C
Start Up time	1 hrs/ programmable timer	1 hrs/ programmable timer	1 hrs
Electrical requirements without compressors	230 V AC , 50 Hz, 1ph, 2 Amps	230 V AC , 50 Hz, 1ph, 2 Amps	230 V AC , 50 Hz, 1ph, 2 Amps
Dimensions of N2 Generators in mtr. (without compressor)	1.5 H x 0.8W x 0.8 D (approx) (as per selection of model)	2 H x 1W x 1 D (approx) (as per selection of model)	2 H x 1W x 1 D (as per selection of model)